Seite wählen

Warlord ⁄⁄ S3

Der brandneue Trimax Warlord S3™ mit seiner hydraulischen Seitenschubfunktion ist ein leistungsstarker Arbeitsbegleiter bei den verschiedensten kommerziellen Anwendungen.

TRIMAX HOCHLEISTUNGSSCHLEGELMÄHER

Der brandneue Trimax Warlord S3™ mit seiner hydraulischen Seitenschubfunktion ist ein leistungsstarker Arbeitsbegleiter bei kommerziellen Anwendungen wie die Unkrautbekämpfung, die Forstwirtschaft, das Mulchen von abgeschnittenem Gras, das Trimmen von Rasen sowie für das Anwenden bei Straßenrändern und beim Gartenbau.

Entworfen, um sicher und zuverlässig zu sein, haben wir unsere robuste Bauweise beibehalten, die den S2 zur bevorzugten Mähmaschine für Mietflotten auf der ganzen Welt machte. Mit der Fähigkeit, Äste mit einem Durchmesser von bis zu 75mm zu zerkleinern und mit den einzigartigen Features, wie unseren Trimax Gamma™ Schlegeln, der einzigartigen Schneidführung und der verstellbaren Heckklappe, meint der Warlord S3 es ernst!

Sprechen Sie noch heute mit uns über die Verwendung des Warlord für Ihre Mähaufgaben.
EINE VORFÜHRUNG BUCHEN
KATALOG HERUNTERLADEN

MERKMALE ⁄⁄DES WARLORD.

Die folgenden Merkmale sind bei allen Warlord S3 Mähern serienmäßig vorhanden:

3 Year Warranty

AUSTAUSCHBARE KUFEN

Die Kufen am Warlord verlängern die Lebensdauer des Mähers in anspruchsvollem Terrain.

LazerBladez

INNENVERKLEIDUNG

Die austauschbare 1/4″ Innenverkleidung reduziert den Lärm und erhöht die Lebensdauer des Mähers.

LazerBladez

SCHNEIDFÜHRUNG

Hilft, Schnittgut und anderes Laub in die vordere Öffnung des Mähers zu befördern.

Full Width Rollers

SCHWERLASTWALZE

Eine robuste Walze mit 8,5 mm dicken Wänden für den harten Einsatz.

LazerBladez

HYDRAULISCHE SEITENVERSCHIEBUNG

Der Warlord S3 kann direkt hinter dem Traktor positioniert oder schnell um bis zu 19″ versetzt werden.

3 Year Warranty

3 JAHRE GARANTIE

Wir bauen Mäher, die lange halten. Dies untermauern wir mit einer 3-jährigen, branchenführenden Garantie.

LazerBladez

AUSWURFSTEUERUNG

Die Grobkörnigkeit des Mulchs wird durch die Höhe der Heckklappe gesteuert. Durch das vollständige Öffnen der Klappe kann der Mäher leichter gewartet werden.

OPTIONAL ⁄⁄ FÜR DEN WARLORD.

Features Icons_LH Offset

LINKSVERSATZ

Der Warlord wird standardmäßig mit Rechtsversatz geliefert, kann aber auch mit Linksversatz bestellt werden. Geeignet für Anwender, die eine Sicht über ihre linke Schulter bevorzugen.

Features Icons_Roller Scrapers

WALZENABSTREIFER

Die spiralförmigen Walzenabstreifer von Trimax arbeiten mit weniger Belastung, üben aber einen konstanten Druck auf die Walze aus, um die Reinigung von Ablagerungen zu unterstützen.

Features Icons_Roadside Skids

SERVICE-KITS

Jedes Kit enthält einen kompletten Satz Klingen, Muttern/Schrauben und Riemen. Alles, was Sie für eine schnelle Routinewartung benötigen!

Features Icons_LH Offset

STRASSENWALZE

Wird serienmäßig mit einer 1/2″ dicken Walze geliefert. Geeignet für anspruchsvollere Anwendungen wie an Straßenrändern.

Warlord VERSATZ.

Warlord S3 hydraulic side shift. Right hand offsets available.

SPEZIFIKATIONEN.

WARLORD/S3 175
WARLORD/S3 205
WARLORD/S3 235
Schnittbreite 1740 mm (69″) Walzen 1
Gesamtbreite 2036 mm (80″) Ungefähres Gewicht 674 kg
Gesamtlänge 1050 mm (41″) Mindest-Zapfwellenleistung 40 hp
Schnitthöhenbereich 0-70 mm (0 – 2 ¾”) Flails Per Mower 24
Schnittbreite 2040 mm (80″) Walzen 1
Gesamtbreite 2336 mm (92″) Ungefähres Gewicht 752 kg
Gesamtlänge 1050 mm (41″) Mindest-Zapfwellenleistung 44 hp
Schnitthöhenbereich 0-70 mm (0 – 2 ¾”) Flails Per Mower 28
Schnittbreite 2340 mm (92″) Walzen 1
Gesamtbreite 2636 mm (104″) Ungefähres Gewicht 789 kg
Gesamtlänge 1050 mm (41″) Mindest-Zapfwellenleistung 49 hp
Schnitthöhenbereich 0-70 mm (0 – 2 ¾”) Flails Per Mower 32

LADEN SIE UNSEREN KATALOG HERUNTER.

Klicken Sie hier, um unseren digitalen PDF-Produktkatalog herunterzuladen.

KATALOG HERUNTERLADEN

BUCHEN SIE EINE
KOSTENLOSE VORFÜHRUNG.

Sind Sie daran interessiert, einen Trimax Mäher in Ihrem Einsatzgebiet in Aktion zu sehen? Überzeugen Sie sich von der Performance und den Vorteilen aus erster Hand.

BUCHEN SIE NOCH HEUTE EINE VORFÜHRUNG

KAUFEN SIE TRIMAX ORIGINALTEILE.

Besuchen Sie online den Trimax Ersatzteilshop, um Originalteile zu kaufen, die direkt zu Ihnen nach Hause geliefert werden.

JETZT ERSATZTEILE KAUFEN

Entriegelungssystem in der Kabine

Entriegeln Sie die Transportsicherung der Mähwerkflügel bequem vom Traktorsitz aus mit einem Entriegelungsseil.

 

Entriegelungssystem in der Kabine

Entriegeln Sie die Transportsicherung der Mähwerkflügel bequem vom Traktorsitz aus mit dem Hydrauliksteuerhebel des Traktors.

 

ANTI-BOUNCE SKIDS

ROADSIDE ROLLER

Comes standard with a 1/2” heavy duty roller. Suitable for more demanding applications such as roadsides.

 

ADVANCED ENGINEERING

Trimax’s meticulous design process combined with bespoke, innovative manufacturing technologies produce the most accurate rotary cut in the market.

 

COMPACT TRACTOR SUITABLE

Able to be paired with tractors as low as 25 hp, perfect for smaller budgets and compact tractors.

 

STRIPING CAPABLE

Full width front and rear rollers produce beautiful striping.

 

ANTI-WEAR SKIDS

Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.

 

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

 

SUSPENSION

La Pegasus est équipée d’un système de suspension Duratorque capable de supporter des vitesses très élevées.

 

ROAD TRANSPORTABLE

Equipped with a roadworthy chassis and capable of being towed at highway speeds.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

SAFE CLIPPING DISPERSION

Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

TURF TYRE

Trimax turf tyres help distribute the weight of the mower for less ground disturbance.

 

WHEELS RUN ON CUT GRASS

As the rear deck is located between the rear transport wheels, grass is not flattened by the wheels prior to mowing, a feature unique to Trimax.

 

ULTIMATE CONTOUR FOLLOWING

Contour following and cut quality is compromised when decks are over 3m wide. The X-WAM features multiple smaller decks for superior cut quality.

 

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

 

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.

 

ROADSIDE ROLLER

Comes standard with a 1/2” heavy duty roller. Suitable for more demanding applications such as roadsides.

 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFETY

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Spindle height is perfectly aligned providing the most accurate cut possible.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUIKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, paths and pavements.

 

AUTO BELT TENSIONERS

Eliminate the need for belt adjustments and improve drive to the spindles blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry