Seite wählen

Neueste Nachrichten von Trimax.

Informieren Sie sich über die neuesten Produkt-Updates und Erscheinungen hier auf unserer Blog-Seite, oder folgen Sie uns in den sozialen Medien über die unten stehenden Links.

Trimax Mowing Systems gab bekannt, dass das Unternehmen sich vom wartungsintensiven Walzenhaltesystem verabschiedet und LocTEK auf den Markt gebracht hat – ein zum Patent angemeldetes wartungsfreies Walzenhaltesystem, das es nur bei Trimax gibt.

Die Hauptvorteile von LocTEK gegenüber dem herkömmlichen Walzenhaltesystem sind:

#1 Erheblich höhere Stabilität und Festigkeit: Herkömmliche Walzenhaltesysteme halten die Walzenstummel direkt in den Lagern mit Hilfe von Gewindestiften oder Schließringen. Bei dieser Methode kam es jedoch lange Zeit durch regelmäßige horizontale Belastung zu Verschleißerscheinungen an den Stiften und Lagern und damit zu Problemen beim Halten der Walzen.

Herkömmliche Walzenstummel müssen oft nachbearbeitet oder ausgetauscht werden, um Verschleißprobleme zu beheben, die sich auf den Halt der Walzen sowie deren Ausrichtung auswirken. LocTEK beseitigt diese Probleme vollständig durch die Verwendung eines besonders belastbaren Gewindebolzens, der durch eine schützende, verzinkte Hülse eingeführt wird und die Walze, das Lager und die Seitenführungen zusammenhält. Dieses einfache, aber innovative Bolzensystem ist nicht nur verschleißfrei, sondern bietet auch eine viel stabilere Halterung und gewährleistet eine kontinuierliche und genaue Ausrichtung der Walzen.

Das neue LocTEK-System beinhaltet auch verstärkte Drei-Schrauben-Lagergehäuse, die mit den Seitenführungen verschraubt werden und das herkömmliche Zwei-Schrauben-System ablöst.

#2 Einfacherer Austausch und geringere Wartungskosten: LocTEK reduziert die benötigte Zeit für den Austausch erheblich. Früher war es oft schwierig und zeitaufwändig, einen mit Kleber befestigten Stummel aus einem Lager zu entfernen. LocTEK erfordert keine Spezialwerkzeuge und kann in nur 15 Minuten ausgetauscht werden. Der Bolzen kann einfach mit einem Schlagbohrer aus dem Walzen- und Lagersystem entfernt werden und die mit Anti-Seize montierte Zinkhülse kann leicht aus dem Lager entfernt werden.

Während bei einigen herkömmlichen Systemen der Walzenstummel nachbearbeitet werden muss oder – wenn der Verschleiß an den Walzenstummeln zu groß ist – eine komplett neue Walze gekauft werden muss, besteht LocTEK aus einzelnen Teilen, die separat erworben werden können. Dies bedeutet, dass nur das entsprechende Teil gekauft werden muss, was zu erheblichen Kosteneinsparungen führt.

#3 Erhöhte Lebensdauer der Lager: Eine der häufigsten Ursachen für Schäden beim Lager ist eine falsche Ausrichtung der Stummel. Eine Falschausrichtung der Walzenstummel kann dazu führen, dass der äußere Laufring des Lagers im Gehäuse schwingt, was einen vorzeitigen Verschleiß des Lagers und des Lagergehäuses sowie ein höheres Austauschintervall zur Folge hat. Durch die vollständige Beseitigung einer Falschausrichtung werden die LocTEK-Lager weniger belastet und halten dadurch deutlich länger. LocTEK verwendet außerdem marktbewährte, qualitativ hochwertige Lager, die jahrelang von Trimax im Gelände getestet wurden.

Um die Langlebigkeit der Lager weiter zu unterstützen, bietet LocTEK mit Hilfe einer cleveren konvexen Rippe am Ende der LocTEK-Walzen einen neuen zusätzlichen Schutz gegen Wasserschäden. Der Walzenrand verhindert, dass Wasser an einer vertikalen Walze hinunterlaufen und das Lager erreichen oder sich dort ansammeln kann.

LocTEK wird derzeit bei allen neuen Trimax Pegasus und ProCut S4 Mähern eingebaut und kann auch als Nachrüstsystem erworben werden, das für bestimmte Mäher zur Umrüstung der Walzenhaltesysteme entwickelt wurde. Für weitere Informationen über das neue LocTEK-System oder für eine kostenlose Vorführung kontaktieren Sie bitte Trimax unter +44 (0) 1933 652235.

New Zealand Pat. App. 737217
Australian Pat. App. 2016250934
UK Pat. App. 1718763.4
US Pat. App. 15/567,875

Entriegelungssystem in der Kabine

Entriegeln Sie die Transportsicherung der Mähwerkflügel bequem vom Traktorsitz aus mit einem Entriegelungsseil.

 

Entriegelungssystem in der Kabine

Entriegeln Sie die Transportsicherung der Mähwerkflügel bequem vom Traktorsitz aus mit dem Hydrauliksteuerhebel des Traktors.

 

ANTI-BOUNCE SKIDS

ROADSIDE ROLLER

Comes standard with a 1/2” heavy duty roller. Suitable for more demanding applications such as roadsides.

 

ADVANCED ENGINEERING

Trimax’s meticulous design process combined with bespoke, innovative manufacturing technologies produce the most accurate rotary cut in the market.

 

COMPACT TRACTOR SUITABLE

Able to be paired with tractors as low as 25 hp, perfect for smaller budgets and compact tractors.

 

STRIPING CAPABLE

Full width front and rear rollers produce beautiful striping.

 

ANTI-WEAR SKIDS

Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.

 

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

 

SUSPENSION

La Pegasus est équipée d’un système de suspension Duratorque capable de supporter des vitesses très élevées.

 

ROAD TRANSPORTABLE

Equipped with a roadworthy chassis and capable of being towed at highway speeds.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

SAFE CLIPPING DISPERSION

Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

TURF TYRE

Trimax turf tyres help distribute the weight of the mower for less ground disturbance.

 

WHEELS RUN ON CUT GRASS

As the rear deck is located between the rear transport wheels, grass is not flattened by the wheels prior to mowing, a feature unique to Trimax.

 

ULTIMATE CONTOUR FOLLOWING

Contour following and cut quality is compromised when decks are over 3m wide. The X-WAM features multiple smaller decks for superior cut quality.

 

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

 

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.

 

ROADSIDE ROLLER

Comes standard with a 1/2” heavy duty roller. Suitable for more demanding applications such as roadsides.

 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFETY

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Spindle height is perfectly aligned providing the most accurate cut possible.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUIKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, paths and pavements.

 

AUTO BELT TENSIONERS

Eliminate the need for belt adjustments and improve drive to the spindles blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry